MEASURING GUIDE

How to measure roller blinds

Illustration of how to measure roller blinds

Measure the width

How you should measure your window depends on how you plan to mount the roller blind. See below.

All our roller blind widths are given as overall dimensions, which means the measurement of the roller blind incl. brackets. This means that the fabric is not as wide as the overall width; the exact measurements are given for each roller blind.

Wall mounting or ceiling mounting

Wall or ceiling mounting is recommended when you want the fabric to cover the window, for example for blackout purposes, and you want to ensure there is no gap for light to shine through.

For blackout, it is a good idea to choose a size that is at least 5 cm wider than the window on each side, to minimise light transmission.

Recess mounting

When you want to install a roller blind that fits inside the window recess, it's important to measure carefully so that the roller blind actually fits between the walls of the recess.

Measure the recess in at least three places (at the top, in the middle, and at the bottom). Deduct 5 mm from the smallest measurement. This is the measurement you should order.

Note: This deduction does not apply to Tension blinds!

Tension - no-drill roller blind for recesses

When ordering Hasta Tension, you should always state the exact width of the window recess, and we will make the roller blind to fit that measurement perfectly. Always measure the recess exactly where the roller blind will be installed, in case the window is slightly crooked.

If you have a very crooked and uneven window, it is a good idea to check that there isn't more than a 1 cm difference in width on each side of the window recess. Otherwise, there is a risk that the roller blind will hit the sides when you roll it down.

Window-mounted roller blind Multifix and Fusion

Illustration of how to measure for a Multifix roller blind

Multifix roller blind

Multifix is mounted directly on the window sash. For clamp brackets, the frame should be a maximum of 2 cm deep. If it is deeper and made of wood, you can use the included metal brackets which are nailed to the top edge, regardless of depth.

When measuring the width, take the window handle into account so that the fabric clears it. The measurement you enter is the total width of the roller blind including brackets. The fabric width is approx. 3.1 cm less than the overall dimensions.

Measure height

Hasta's roller blinds come in fixed lengths and cannot be shortened in height. Several models have extra length for tall windows.

Operating height (simply called height when you order) indicates how far down the roller blind can be pulled. Measure the height of the window or the area you want to cover to choose the right height. If the roller blind's height is greater than your window, simply don't roll the roller blind all the way down.

Important: Never pull the roller blind down past the indicated maximum height, even if there is fabric left. It needs an extra turn around the tube to be securely attached. If you pull too far, the fabric risks detaching.

Image of a roller blind showing the installation height

Installation height - important for child safety

The installation height determines the chain's position and length, ensuring it is out of reach of small children according to applicable safety regulations.
When measuring the installation height, it's easiest to first mark where the blind will be installed. Then measure the distance from the floor up to the top edge of the blind where it will be fitted – that measurement is the installation height.

If you want to read more about requirements and safety rules, you can read our guide on blinds and child safety.

How we calculate the beaded chain length:
Installation height - 150 cm.

To hang at a child-safe distance, the beaded chain should be 150 cm from the floor. This means that if your installation height is, for example, 200 cm, the beaded chain will be 50 cm long.

Always state the installation height when ordering. If you choose "unknown," a standard chain of 100 cm will be delivered.

Do you want a specific chain length? Write it in the order notes. Available lengths: 30, 50, 60, 70, 90, 100, 125, 150, and 200 cm.

Frequently asked questions about measuring roller blinds

How much wider than the window should a roller blind be?

For blackout, it is important that the roller blind is wider than the window itself to reduce light transmission from the sides. A common recommendation is at least 5 cm extra on each side. For this to work, the roller blind needs to be mounted on the ceiling or on the wall outside the window. The wider the roller blind, the less light transmission from the sides.

How to measure for roller blinds?

How you measure for roller blinds depends on the model you choose and whether it will be mounted inside the window recess or outside the window. The measurements therefore differ depending on both the type of roller blind and its placement. See the respective measuring instructions higher up in the guide for the correct model and mounting.

How do I know what size of roller blinds to buy?

The size you need depends on where the roller blind will be installed and which model you choose. Start by deciding whether it should be inside the window recess or outside the window, and then follow the measuring instructions for the correct model and mounting method. All our roller blinds can be customised in width, and many models are also available in standard sizes.

Where should the roller blind be placed?

Where you place the roller blind depends on both the style and the function you want. For blackout, it is often best to mount the roller blind outside the window, ideally a little above it and in a wider size, to reduce light transmission from above and from the sides. For light-filtering fabrics and screen fabrics, it can instead look good to mount the roller blind inside the window recess, where it gives a more discreet look.

Should I measure the entire roller blind or just the fabric?

When ordering, you always state the total width of the roller blind, including brackets. At the same time, bear in mind that the fabric itself is always a few centimetres narrower than the overall dimensions. The exact difference varies between roller blind models.

What's the difference between recess mounting and external mounting?

The difference concerns both appearance and function. If you want blackout, installation outside the window is usually best, as you can then choose a wider size than the window itself and so reduce light transmission from the sides. For roller blind fabrics that let in more light, many people choose recess mounting instead, where possible, for a more discreet overall look.

Glossary

Overall dimensions
The total width of the roller blind including wall brackets

Fabric dimensions
The total width of the fabric. It is approximately 3.5-4 cm less than the overall dimensions.

Operating height
The maximum height to which you can pull down the roller blind. The total height of the roller blind fabric is greater than the operating height. This is so that you never pull the roller blind all the way out, as there is a risk that it could come loose from the tube. So never pull the roller blind down further than the recommended operating height.

Installation height
The height at which the roller blind is to be mounted. This height must be specified according to European law so that we can ensure that beaded chains and cords are out of reach of small children.

Beaded chain
The chain you pull to raise and lower the roller blind.

Bottom bar
The rod/rail that sits in the hem at the bottom of the roller blind and weighs it down so that the fabric hangs straight.

P-clips
A fastening device for the beaded chain used to secure the beaded chain to the wall so that it is out of reach of children.

Under-rolled
Means that the roller blind is rolled so that the roller is visible and the fabric comes close to the window. Recommended and standard for blackout blinds.

Over-rolled
Means that the roller blind is rolled so that the roller is not visible, which means the fabric hangs a little further away from the wall. Recommended for light-filtering and decorative roller blinds, and when you think it looks best without the roller showing.