Screwless blind Tension, custom-made, white or black

Tension Blind, custom-made, white or black

The friction blind that you tension in the window niche – no screws needed!

• Width: Made to your exact measurements
• Height: max height 160 cm
• Model: Tension
• Mounting: screw-free in the window niche
• Adjustment: with adjustment cord
• Delivery time: approx. 3 weeks

HOW TO MEASURE
Please note! The measurement refers to the total dimensions of the blind, including wall brackets. The actual slat dimensions are approx. 1 cm less than the stated measurement. Depending on the window design, this may result in some light leakage from the gaps that arise on the sides. In these cases, a traditional blind with screw fixings, wider than the window's total width, is recommended.

When ordering Hasta Tension, always state the exact width of the window niche, and we will make the blind to perfectly fit that measurement. Always measure the niche exactly where the blind is to be installed, in case the window is slightly crooked.

If you have a window that is very crooked and uneven, it is advisable to check that the width in the window niche does not differ by more than 1 cm on each side. Otherwise, there is a risk that the blind will hit the sides when you roll it down.

OTHER
The blind is adjusted with a cord on either side. High-quality mechanism makes the blind easy to adjust. All our sunscreens can be mounted for child safety with the included safety device for the adjustment cord.

Hasta Tension instructions in PDF format

NOTE! Since the product is custom-made, we cannot offer return rights. Delivery time approx. 3 weeks.

Child Safety

Roller blinds, Roman blinds, and other sunscreens adjusted with a chain or cord can pose a strangulation risk if they are within reach of small children. We at Hasta naturally want to prevent you from being exposed to this risk and have developed safety devices for all our sunscreens that keep the chain/cord out of reach of your children. To avoid risk, be careful to mount this safety device at a sufficient height and carefully read the recommendations in the accompanying instructions.

Item number

245655

Dimensions

Slat width: 25 mm
Slat thickness: 0.18 mm

Mounting

Niche, Screwless

Operation

Cord

Installation height
Installation height is the distance from the floor up to the point where the blind is mounted. On made-to-measure blinds with a cord or beaded chain, the installation height is used to adjust the length of the operation so that it ends up at a child-safe distance (150 cm above the floor).

Read more in our guide to child safety.

Child safety
Roller blinds, Roman blinds and other blinds that are adjusted with a chain or cord can pose a risk if they are within reach of small children. For your peace of mind, the roller blind is supplied with a safety device for the beaded chain. It helps to keep the chain out of reach of small children. We recommend that you always install the safety device according to the enclosed instructions for a safe home environment.

Delivery time
Our aim is to deliver all orders within the stated time. Standard products are normally dispatched from our warehouse within 1–3 working days. This is followed by the carrier's delivery time of usually 1–3 working days. Made-to-measure products have an estimated delivery time of approx. 3 weeks. The delivery time may vary slightly depending on the carrier and production workload.

Delivery Methods
Available delivery methods vary depending on the market. The delivery options available for your order are shown at checkout. 
We offer free delivery on orders over SEK 999.

Returns
A 14-day right of return applies from the day you receive your order. Made-to-measure products are not covered by our returns policy or the right of return.

Read more about deliveries, returns and complaints here.